asdeasoft.net

Dear STKO team,
I have a problem with the mesh generation. In this beam I modeled the anchorage plate on each side of the element. The problem is that I need to generate a structurate quad mesh for the shell but on the right the program generates a mesh that is formed by one triangular and others rectangles while on the left I have only rectangular. The elements are the same.
I attached the model.
Thanks in advance

Regards

Antonella

Hi AntoMarinelli,

I opened your model and I solved the issue by remodelling the anchorages plates. Here is the model!

I also have the same problem

Hi baovietgps,
can you attach your model so we can check out your problem?