asdeasoft.net

Posted: **Mon Feb 28, 2022 6:10 pm**

Hi,

In my Work Tree -> Analysis steps, how do I adjust the order of my steps in a convenient way? Do I always have to remove and redefine everything if errors need to be corrected or new intermediate steps to be added?

: 1.png (7.39 KiB) Viewed 1463 times

Many thanks,
Ziliang

Posted: **Mon Feb 28, 2022 10:00 pm**

OK, I got it, it's not as straight forward as draging by cursor but fair enough

: q.PNG (29.43 KiB) Viewed 1458 times

Posted: **Tue Mar 01, 2022 8:47 am**

Hi Ziliang, glad you were able to figure it out so quick!
While you are adjusting to STKO, these two playlists might help.
This is a set of tutorials to help you learn the basic functions of the program: https://youtube.com/playlist?list=PLxIj ... OIDBr0DauU
And this is a set of webinars aimed at getting students started in STKO and OpenSees through a series of theoretical and practical webinars: https://youtube.com/playlist?list=PLxIj ... OIDBr0DauU

asdeasoft.net

Adjusting the order of analysis steps

Adjusting the order of analysis steps

Re: Adjusting the order of analysis steps

Re: Adjusting the order of analysis steps