Hi im trying to replicate the pile soil interaction webinar. Its my first time using stko so im having lots of issues. Can anybody explain me step by step since the design process since the desing to the final simulation???
Id like to do the same but changing the soil with differents layers with differents lengths.
Thanks so much!!
PILE SOIL INTERACTION
PILE SOIL INTERACTION
Hi im trying to replicate the pile soil interaction webinar. Its my first time using stko so im havng lots of isues. Can anybody explain me step by step since the design process? Id like to do the same but chnging the soil with diferents altitudes. Tanks!
-
YANGYURONG
- Posts: 1
- Joined: Fri Jan 26, 2024 3:55 pm
Re: PILE SOIL INTERACTION
I am having a big problem establishing the interaction contact between the solid bucket elements and the soil elements, I would appreciate your reply! The contact unit I used was zer oLengthContactASDimplex; The inside and outside surfaces of my bucket and the top of the bucket are in contact with the soil;My superstructure is heavy,There will be a very large settlement in earth stress equilibrium, and no matter how I adjust the stiffness of the contact surface, I can't change it. Right.That could be the contact surface;I hope you can give me some guidance,thanks.