Load-displacement curve

Post Reply
Clarabella
Posts: 131
Joined: Wed Jul 08, 2020 3:50 pm

Re: Load-displacement curve

Post by Clarabella » Fri May 21, 2021 12:45 pm

Dear Mari,
Horace and I modified your model. Attached the version with the structured mesh and modified bc. We hope this is useful.
Regards
HH and C
Attachments
desnerckreinforcement.zip
(415.04 KiB) Downloaded 208 times
Top
Clarabella
Posts: 131
Joined: Wed Jul 08, 2020 3:50 pm

Re: Load-displacement curve

Post by Clarabella » Fri May 21, 2021 1:11 pm

These are the results. We think that there is a problem with the support.
Regards
Attachments
Presentation1.png
Presentation1.png (294.67 KiB) Viewed 2266 times
Top
STKO Team
Posts: 3066
Joined: Tue Oct 29, 2019 8:45 am

Re: Load-displacement curve

Post by STKO Team » Fri May 21, 2021 3:12 pm

You can also make a finer mesh to visualize better the crack pattern:
deck.png
deck.png (678.3 KiB) Viewed 2265 times
Top
Horace Horsecollar
Posts: 33
Joined: Mon Mar 22, 2021 11:42 am

Re: Load-displacement curve

Post by Horace Horsecollar » Fri May 21, 2021 3:22 pm

Cool picture! It is quite evident that the problem is how the support is modeled.
Top
mari.95
Posts: 26
Joined: Fri Apr 16, 2021 3:42 pm

Re: Load-displacement curve

Post by mari.95 » Sat May 29, 2021 9:37 am

Sorry, I'm just looking at your suggestions, I'll try to model the support differently. Thank you very much for helping.
Top
Post Reply

Return to “Analysis”